Nissan Armada 2025-2026 Service and Repair Manual: Refilling

Nissan Armada 2025-2026 Service and Repair Manual / Maintenance / Periodic Maintenance / Engine Maintenance / Refilling

WARNING:

Install drain plug with new washer. Refer to Exploded View.

CAUTION:

Be sure to clean drain plug and install with new washer.

Refill with new engine oil.

Engine oil specification and viscosity: Refer to Fluids and Lubricants.

Engine oil capacity

: Refer to ENGINE OIL.

CAUTION:

When filling engine oil, do not pull out oil level gauge.

The refill capacity depends on the engine oil temperature and drain time. Use these specifications for reference only.

Always use oil level gauge to determine the proper amount of engine oil in engine.

Warm up the engine and check area around drain plug and oil filter for engine oil leakage.

Stop the engine and wait for 10 minutes.

Check the engine oil level. Refer to Inspection.

Perform the “Engine Oil Data Reset”. Refer to Work Procedure.

Draining

WARNING: WARNING: Never get burn yourself, as engine oil may be hot. Prolonged and repeated contact with used engine oil may cause skin cancer. Try to avoid direct skin contact with used engine oil. I ...

Oil Filter

...

Other materials:

Anchoring with Frame Attachments
A difference between the frame anchoring and the uni-body anchoring is that the frame itself is held down. (For the basic anchoring methods for uni-bodies, refer to Securing the Vehicle.) Frame straightening equipment makers offer the attachments for frame anchoring including those intended for any ...

Removal and Installation
REMOVAL Remove rear A/C unit assembly. Refer to Removal and Installation. Remove rear heater core. Refer to Removal and Installation. Remove rear mode door motor. Refer to Removal and Installation. Remove sub harness from rear A/C unit case RH. Disconnect rear blower motor harness connector. Dis ...

LiquidGasket
LIQUID GASKET APPLICATION PROCEDURE Remove old liquid gasket adhering to the liquid gasket application surface and the mating surface. Remove liquid gasket completely from the liquid gasket application surface, mounting bolts, and bolt holes. Wipe the liquid gasket application surface and the matin ...

0.0068