WARNING:
Remove engine under cover. Refer to Exploded View.

| Recommended oil and capacity: | Refer to Fluids and Lubricants. |
Set a gasket on filler plug, and install it to final drive assembly.
CAUTION:
Never reuse gasket.
Tighten filler plug to the specified torque. Refer to Exploded View.
Install engine under cover. Refer to Exploded View.
DrainingExploded View
12V SUB BATTERY (LITHIUM ION BATTERY) HARNESS
12V sub battery (lithium ion battery) harness 1 : To 12V sub battery (lithium ion battery) : Vehicle front : N·m (kg-m, in-lb) : N·m (kg-m, ft-lb)
12V SUB BATTERY (LITHIUM ION BATTERY)
:12V sub battery (lithium ion battery) cover seal :12V su ...
Inspection and Adjustment
SYSTEM INITIALIZATION
Perform additional service for operating the power window control system normally after installing front door regulator. Refer to Work Procedure.
FITTING INSPECTION
Check that the glass is fitted securely into the sash groove.
Lower the glass slightly [approximately 10 to 20 m ...
Removal and Installation
CAUTION:
Never damage the body panel.
REMOVAL
CAUTION:
Remove luggage floor box. Refer to Removal and Installation.
Release luggage rear plate portion of back door weather-strip. Refer to Removal and Installation.
Remove luggage rear plate mask.Apply protective tape (A) on luggage rear plate to prot ...