REMOVAL
Remove the front door finisher. Refer to Removal and Installation.
Remove center squawker mounting screws
, and then remove center squawker
.

INSTALLATION
Installation is the reverse order of removal.
Center Squawker
Rear Door WooferRemoval and Installation
CAUTION:
Never damage the body panel.
REMOVAL
CAUTION:
Remove luggage floor box. Refer to Removal and Installation.
Release luggage rear plate portion of back door weather-strip. Refer to Removal and Installation.
Remove luggage rear plate mask.Apply protective tape (A) on luggage rear plate to prot ...
Inspection
WARNING:
LOOSENESS OF CONNECTED PART
Check each fixing bolt and nut for looseness using torque wrench. For each tightening torque, refer to Exploded View.
BACKLASH OF JOINT PART
BACKLASH OF CENTER BEARING
Move the shaft near center bearing up and down and from side to side (axial direction of shaft ...
ELECTRIC INTAKE VALVE TIMING CONTROL MODULE : Removal & Installation
REMOVAL
Remove air cleaner body. Refer to Removal and Installation.
Remove harness clip to bracket.
Disconnect electric intake valve timing control module harness connector. HARNESS CONNECTOR (LEVER LOCKING TYPE) in Refer to Harness Connector.
Remove electric intake valve timing control module mount ...