Removal & Installation
Removal & InstallationInspection of Welded Portion
Spot welded portions can be checked by the destructive inspections explained below. They can be easily adopted when welding. Before and after welding, you should perform these destructive inspections to check the strength of the welded portions.
The welding spots should be equally spaced and arrange ...
Service Notice or Precautions for Steering System
In case of removing steering gear assembly, make the final tightening with grounded and unloaded vehicle condition, and then check wheel alignment.
Observe the following precautions when disassembling.
Before disassembly, thoroughly clean the outside of the unit.
Disassembly should be done in a clea ...
Disassembly and Assembly
DISASSEMBLY
Remove the following parts:
Oil pan (lower): Refer to Removal and Installation.
Oil pan (upper): Refer to Disassembly and Assembly.
Timing chain: Refer to Removal and Installation.
Cylinder head: Refer to Removal & Installation.
Oil strainer and oil pump: Refer to Removal and Insta ...