Nissan Armada 2025-2026 Service and Repair Manual: Removal and Installation
WARNING:
REMOVAL
Remove transfer assembly from vehicle. Refer to Removal and Installation.
Remove input oil seal.
CAUTION:
Never damage the front case and input shaft.
INSTALLATION
Note the following, and install in the reverse order of removal.
-
L : 1.5 – 2.5 mm (0.059 – 0.098 in) 
CAUTION:
Never reuse input oil seal.
Apply transfer fluid onto circumference of oil seal.
When installing, never incline input oil seal.
Never handle the oil seal inner periphery and oil seal lip.
Exploded View
Transfer assembly Input oil seal : Vehicle front : Always replace after every disassembly. : Apply transfer fluid. ...
Other materials:
Exploded View
Without Moonroof Models
Map lamp bracket Headlining assembly Map lamp assembly : Pawl : Metal clip : Vehicle front
With Moonroof Models
Map lamp bracket Headlining assembly Map lamp assembly Dual-lock fastener : Pawl : Metal clip : Vehicle front ...
Outer Sill
WARNING:
For easier installation, remove the "View A, B, C, D, E, F and U" weld point, bolt and nut.
Remove the lower side dash assembly (reusable) from the vehicle for easier installation.
Body sealing Urethane foam : Vehicle front
: Weld the parts onto the back of the component part.
*: For spo ...
Precautions for Removing Battery Terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...
0.0054