WARNING:
NOTE:
Remove boot after drive shaft is removed from the vehicle.
Remove and install drive shaft. Refer to Removal and Installation.
Disassembly and assembly drive shaft. Refer to Disassembly and Assembly.
Exploded ViewRemoval and Installation
REMOVAL
CAUTION:
When replacing chassis control module, configuration of chassis control module is required. Refer to Description.
Without Dynamic Digital Suspension And Electronic Air Suspension
Remove the glove box. Refer to Removal and Installation.
Disconnect the chassis control module harness c ...
Diagnosis Procedure
CAUTION:
Brake stopping distance on slippery road like rough road, gravel road or snowy road may become longer when ABS is operated than when ABS is not operated.
CHECK BRAKING FORCE
Check the brake force using a brake tester.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Check ...
Engine Assembly
GENERAL SPECIFICATIONS
Cylinder arrangement V-6 Displacement cm3 (cu in) 3,492 (213.08) Bore and stroke mm (in) 86.0 x 100.2 (3.386 x 3.944 ) Valve arrangement DOHC Firing order 1-2-3-4-5-6 Number of piston rings Compression 2 Oil 1 Number of main bearings 4 Compression ratio ...