REMOVAL
Remove luggage side lower finisher RH. Refer to Removal and Installation.
Remove height level control switch harness connector.
Remove height level control switch.
INSTALLATION
Installation is in the reverse order of removal.
Removal and Installation
WARNING:
CAUTION:
For repair and mending of irradiation area of side radar, be careful the following.
Never affix a sticker (including transparent one) or install an accessory to the detecting range of side radar.
Since it affects side radar performance, there are some restrictions on the various co ...
Removal and Installation
CAUTION:
Never damage the back door panel.
REMOVAL
CAUTION:
Fully open back door.
Apply protective tape (A) on back door lower finisher to protect it from damage.
Disengage automatic back door switch finisher fixing pawls using a remover tool (A).
: Pawl
Disconnect harness connectors, and the ...
MULTI-WAY CONTROL VALVE : Removal & Installation
WARNING:
REMOVAL
Remove engine cover. Refer to Removal and Installation.
Remove front under cover using a power tool. Refer to Removal and Installation.
Drain engine coolant. Refer to ENGINE COOLANT : Draining.
CAUTION:
Perform this step when the engine is cold.
Remove air inlet tube 2. Refer to ...