Nissan Armada 2025-2026 Service and Repair Manual: Removal and Installation
REMOVAL
Remove headlining assembly. Refer to Removal and Installation.
Disconnect IR sensor harness connector 
.
Remove room lamp harness from IR sensor assembly.
Disengage fixing pawls, and then remove IR sensor finisher 
and IR sensor assembly 
.
 | : Pawl |
INSTALLATION
Install in the reverse order of removal.
Exploded View
IR sensor assembly Headlining assembly IR sensor finisher: Pawl : Vehicle front ...
Other materials:
Diagnosis Procedure
CHECK AUTO OPEN/CLOSE FUNCTION
Check auto open/close function using automatic back door switch.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Refer to Diagnosis Procedure.
CHECK INTELLIGENT KEY
For automatic back door lock and close switch cannot be used for auto close function ...
Work Procedure
CAUTION:
Always use CONSULT when adjusting the neutral position of steering angle sensor. (It cannot be adjusted other than with CONSULT.)
CHECK THE VEHICLE STATUS (1)
Stop vehicle with front wheels in the straight-ahead position.
Does the vehicle stay in the straight-ahead position?
YES>>
G ...
FUEL PUMP CONTROL MODULE (FPCM) : Removal & Installation
REMOVAL
Remove the luggage side finisher LH. Refer to Exploded View.
Disconnect fuel pump control module (FPCM) harness connector and remove the FPCM from the vehicle.
Remove bracket from fuel pump control module (FPCM).
INSTALLATION
Install in the reverse order of removal.
Install bracket to fuel ...
0.0053