REMOVAL
Front Door Parting Seal Front
Fully open front door.
Apply protective tape (A) to front door panel around front door parting seal front for preventing damage.

Disengage fixing clips on the reverse side of front door parting seal front using a remover tool (A), and then remove front door parting seal front.

![]() | : Clip |
Front Door Parting Seal Rear
Fully open front door.
Apply protective tape (A) to front door panel around front door parting seal rear for preventing damage.

Disengage fixing clips on the reverse side of front door parting seal rear using a remover tool (A), and then remove front door parting seal rear.

![]() | : Clip |
INSTALLATION
Install in the reverse order of removal.
Rear DoorExploded View
Back door panel Tail lamp LH Grommet Tail lamp RH : Clip : N·m (kg-m, in-lb) ...
Removal and Installation
REMOVAL
Remove front grille upper. Refer to Removal and Installation (OFF ROAD MODELS) or Removal and Installation (CITY MODELS).
Disconnect hood lock switch harness connector (if equipped).
Remove hood lock assembly mounting bolts, and then remove hood lock assembly.
CAUTION:
Never bend hood lock ...
Work Procedure
CAUTION:
Always use CONSULT when adjusting the neutral position of steering angle sensor. (It cannot be adjusted other than with CONSULT.)
CHECK THE VEHICLE STATUS (1)
Stop vehicle with front wheels in the straight-ahead position.
Does the vehicle stay in the straight-ahead position?
YES>>
G ...