REMOVAL
Remove rear door finisher. Refer to Removal and Installation.
Remove rear door inside handle fixing screws
.

Remove rear door inside handle fixing pawls, and then remove rear door inside handle.

![]() | :Pawl |
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
When connecting rear door inside handle cable to rear door inside handle, check that rear door inside handle cable is properly engaged with rear door inside handle.
After installation, check rear door lock. Refer to Inspection.
Work Procedure
CHECK ANTI-PINCH FUNCTION
Fully open the moonroof.
Place a piece of wood near the fully closed position.
Close the moonroof completely with auto closed.
Check that moonroof opens for approximately 145 mm (5.71 in) without pinching a piece of wood and stops.
Fully open the sunshade.
Place a piece of ...
Changing
WARNING:
Recommended fluid and fluid capacity Refer to Fluids and Lubricants.
CAUTION:
Use only recommended A/T fluid. Never mix with other A/T fluid.
Start the engine.
Adjust the A/T fluid temperature to be approximately 50°C (122°F).
NOTE:
Check with "Fluid temperature" in "Data monitor" i ...
Diagnosis Procedure
CHECK SYMPTOM
Check the symptoms.
A stop/start indicator lamp turned on, and did an engine perform a stall at the time of restart from a stop/start system?
YES>>
GO TO 2.
NO>>
Refer to Symptom Table.
CHECK STOP/START PROHIBIT CAUSE
With CONSULT
Select “Stop/Star engine stall cause d ...