Nissan Armada 2025-2026 Service and Repair Manual: Removal and Installation
REMOVAL
Remove front center console bracket. Refer to Removal and Installation.
Disconnect inside key antenna (console) harness connector.
Remove inside key antenna (console) fixing TORX bolts 
, and then remove inside key antenna (console) 
.
INSTALLATION
Install in the reverse order of removal.
Console
...
Luggage Room
...
Other materials:
TIG Welding
TIG is the abbreviation for tungsten inert gas shielded arc welding. TIG has the following special features.
Special features
Initial cost of the equipment is low, as is maintenance expense.
For ordinary electric power, high frequency alternating current is used.
Easy to learn in a short time.
Exce ...
Exploded View
REMOVAL
Front center console switch finisher assembly Front center console bracket Front center console side finisher upper LH Front center console side finisher lower LH Instrument lower cover LH Front center console mask LH Front center console rear finisher assembly Front center console bo ...
Calibration of Yaw Rate Sensor
CAUTION:
Always perform the yaw rate sensor calibration before driving when the following operation is performed. Refer to Work Procedure.
×: Required —: Not required
Procedure Yaw rate sensor calibration Removing/ installing ABS actuator and electric unit (control unit) × Replacing ABS act ...
0.0067