REMOVAL
CAUTION:
Never excessively pull front door glass run.
Fully open front door glass.
Remove front door sash cover. Refer to Removal and Installation.
Remove front door sash inner cover. Refer to Removal and Installation.
Remove front door glass run according to numerical order 1→2 indicated by arrows as shown in the figure.

CAUTION:
Should be pulled out slowly to prevent damage front door glass run.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
After installing, perform the inspection and adjustment. Refer to Inspection and Adjustment.
Diagnosis Procedure
CHECK POWER WINDOW MAIN SWITCH POWER SUPPLY AND GROUND CIRCUIT
Check power window main switch power supply and ground circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioning parts.
CHECK FRONT POWER WINDOW MOTOR ( ...
Removal and Installation
WARNING:
REMOVAL
WARNING:
CAUTION:
Release the parking brake.
Remove tires. Refer to ROAD WHEEL TIRE : Removal & Installation.
Disconnect the parking brake actuator harness connector .
Remove sliding pin bolts .
Remove the cylinder body , and suspend the cylinder body with suitable wire so t ...
Inspection and Adjustment
INSPECTION BEFORE INSTALLATION
Be sure to check dimension (A) to ensure it is within the reference value limit.
B : Scale C : Straightedge
Dimension (A) : Refer to Torque Converter.
INSPECTION AFTER INSTALLATION
Start the engine and check visually that there is no leakage of ATF.
Check A/T ...