Removal and Installation
Removal and InstallationHow To Check
If fuse is blown, be sure to eliminate cause of malfunction before installing new fuse.
Use fuse of specified rating. Never use fuse of more than specified rating.
Do not partially install fuse; always insert it into fuse holder properly.
Remove fuse for “ELECTRICAL PARTS (BAT)” if vehicle is n ...
Removal and Installation
REMOVAL
CAUTION:
Before removing, take a short memo/photo to remember door harness and cable layout.
Rear Door Inner Frame Front
Remove pull handle bracket. Refer to Removal and Installation.
Apply protective tapes (A) on the part to protect it from damage.
Disengage fixing clips by using removal ...
Diagnosis Procedure
CHECK THIGH SUPPORT MECHANISM
Check for the following.
Mechanism deformation or pinched foreign materials.
Interference with other parts because of poor installation.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioning parts.
CHECK THIGH SUPPORT S ...