For removal and installation of light & rain sensor, refer to Removal and Installation.
Exploded ViewDisassembly and Assembly
DISASSEMBLY
Remove front wiper drive assembly. Refer to Removal and Installation.
Remove front wiper linkage from front wiper motor assembly and front wiper pivot assembly.
ASSEMBLY
Note the following item, and then assemble in the reverse order of disassembly.
CAUTION:
Before assembly, apply body g ...
Work Procedure
DESCRIPTION
The purpose of the operation inspection is to check that the individual system operates normally.
Check condition : Engine running at normal operating temperature.
OPERATION INSPECTION (DISPLAY UNIT)
CHECK MEMORY FUNCTION
Touch AUTO switch to activate air conditioning.
Set temperatur ...
ECM : Removal & Installation
CAUTION:
Perform ADDITIONAL SERVICE WHEN REPLACING ECM. Refer to Work Procedure.
REMOVAL
With ProPILOT Assist 2.1
Disconnect the ECM harness connectors.
Remove ECM mounting nuts ( ) and remove ECM from the bracket.
Remove bracket mounting nuts ( ) and remove the bracket .
Without ProPILOT Ass ...