CAUTION:
REMOVAL
CAUTION:
Apply protective tape (A) on roof rear garnish to protect it from damage.

![]() | : Vehicle front |
Disengage luggage room lamp fixing pawl using a remover tool (A), and then pull out luggage room lamp from roof rear garnish.

![]() | : Pawl |
![]() | : Vehicle front |
Disconnect harness connector, and then remove luggage room lamp.
INSTALLATION
Install in the reverse order of removal.
Exploded View
ReplacementPrecautions for Repair Coating
A caution label is attached on the backside of the hood for models to which scratch shield is applied. Be sure to check the caution label when performing paint repair work.
Before repairing scratch shield paint vehicles, contact the paint manufacturer.
NOTE:
In some cases, the name ASAP (Anti Scrat ...
Exploded View
Ball seat Axle housing Bushing Baffle Back plate Hub bolt Wheel hub and bearing assembly Disc rotor Wheel hub lock nut Cotter pin Tightening must be done following the installation procedure. Refer to Removal and Installation. : Vehicle front : N·m (kg-m, ft-lb) : Always replace after ...
Precautions for Removing Battery Terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...