Nissan Armada 2025-2026 Service and Repair Manual: Removal and Installation
REMOVAL
Remove luggage side lower finisher LH. Refer to Removal and Installation.
Disconnect inverter unit harness connector.
Remove inverter unit mounting nuts.
Remove the bracket from the inverter unit if necessary.
INSTALLATION
Note the following, and install in the reverse order of removal.
To install mounting nuts of inverter unit, referring tightening to the specified torque to the numerical order shown in the figure.
| Specified torque | : 1 → 2 → 3 → 4 | ||||
 | : Vehicle front | ||||
Exploded View
Bracket LH Inverter unit Bracket RH :N·m (kg-m, in-lb) ...
Ac 120v Outlet
...
Other materials:
Removal and Installation
CAUTION:
Never move intelligent rear view mirror beyond the movable range as the wiring may break.
: Vehicle front
intelligent rear view mirror movable range A : Standard position B : Less than 20° (upward adjustment range) C : Less than 20° (downward adjustment range) D : Less than ...
Frame Straightening
Buckling portions have been work hardened. When straightening frames, straighten by pulling out while heating with oxy-acetylene gas welder. Unlike steel plates, aluminum alloy does not change color even when heated. Use a noncontact type thermometer or thermometry pen to control the temperature. Be ...
Adjustment
WARNING:
CAMBER, CASTER
Adjust with the front/rear side adjusting bolts on the lower link.
: Vehicle front
See the following table for the amount of cam bolt scale movement and the variation of camber and caster.
CAUTION:
Align the adjusting bolt cutout with the stamp of lower link bracket. ...
0.005