REMOVAL
Remove instrument pad B. Refer to Removal and Installation.
Disengage the fixing pawls using a remover tool (A) and then remove push-button ignition switch from instrument pad B.

![]() | : Pawl |
INSTALLATION
Install in the reverse order of removal.
Panel Repair Methods
(1) CORRECTION OF CONCAVE PANEL WITH SPOONS
Convex panels can be repaired with a hammer and punch. Concave panels can be repaired with a spoon if the following conditions are satisfied:
The spoon must be able to be inserted behind the concave panel. A closed construction portion or mating panel cann ...
Removal and Installation
WARNING:
REMOVAL
Disconnect negative battery terminal. Refer to Removal and Installation.
Remove rear propeller shaft. Refer to Removal and Installation .
Remove front propeller shaft. Refer to Removal and Installation.
Disconnect transfer cam position sensor harness connectors and separate harnesse ...
GENERAL PRECAUTION : Precautions
WARNING:
When replacing fuel line parts, be sure to observe the following.
Put a “CAUTION: FLAMMABLE” sign in the workshop.
CAUTION:
Use gasoline required by the regulations for octane number.Refer to Fuel..
Before removing fuel line parts, perform out the following procedures:
Put drained fuel ...