Inspection
-
Check valve seat
of reservoir tank cap.
: Metal plunger -
Check if valve seat is swollen to the extent that the edge of the metal plunger cannot be seen when watching it vertically from the top.
-
Check if valve seat has no soil and damage.
-
-
Pull negative-pressure valve to open it, and check that it close completely when released.
-
Check that there is no dirt or damage on the valve seat of reservoir tank cap negative-pressure valve.
-
Check that there are no unusualness in the opening and closing conditions of negative-pressure valve.
-
-
Check reservoir tank cap relief pressure.
Standard and limit : Refer to RADIATOR : Service Data. -
When connecting reservoir tank cap to the radiator cap tester (commercial service tool) and the radiator cap tester adapter (commercial service tool) (A), apply engine coolant to the cap seal surface.
-
-
Replace reservoir tank cap if there is an unusualness related to the above three.
CAUTION:
When installing reservoir tank cap, thoroughly wipe out the reservoir tank to remove any waxy residue or foreign material.
Other materials
RAB system operation
Vehicle information display
RAB system warning indicator (vehicle information display)
RAB system OFF warning light (instrument panel)
Steering-wheel-mounted controls (right side)
Touch screen display
The Nissan Armada RAB system becomes active when the transmission is shifted
in ...
Input Oil Seal
Exploded View
Transfer assembly
Input oil seal
: vehicle front
: Always replace after every disassembly.
: Apply transfer fluid.
Removal and Installation
WARNING:
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and ...
Location of Plastic Parts
Precautions for Plastics
Abbreviation Material name Heat resisting temperature °C (°F)
Resistance to gasoline and
solvents Other cautions
PE
Polyethylene
60 (140)
Gasoline and most solvents are harmless if applied for a very short time (wipe out quickly).
Flammable
ABS
Acrylon ...