Diagnosis Procedure
CHECK FRONT DOOR SWITCH
Check front door switch. Refer to Component Function Check.
Is the inspection result normal?
YES>>Replace BCM. Refer to Removal and Installation.
NO>>Repair or replace the malfunctioning parts.
Other materials
Front Stabilizer
Exploded View
Stabilizer bar
Stabilizer bushing
Stabilizer clamp
Stabilizer connecting rod
Lower link
: N·m (kg-m, ft-lb)
Removal and Installation
WARNING:
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or d ...
Zero Point Reset
Description
Zero point reset is an initializing procedure for occupant detection system that must be performed when replacing occupant detection system control unit or removing and installing passenger seat.If zero point reset is not performed, the initialization is incomplete and occupant detection ...
Additional Service When Replacing Steering Column Control Module
Description
Each function is reset to the following condition when the steering column control module is replaced. For details, refer to Work Procedure. Function Condition Procedure
Memory (Steering column)
Erased
Perform memory storing
Work Procedure
REPLACE STEERING COLUMN CONTROL MODUL ...