Work ProcedureRemoval and Installation
REMOVAL
Using a suitable tool, release clips , and remove cover .
Disconnect front camera (driving video recorder) harness connector.
Push to the arrow the stopper , and remove the front camera (driving video recorder) from bracket .
INSTALLATION
Note the following, and install in the reverse ...
Precautions for Removing Battery Terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...
Door Does Not Lock/unlock and Engine Does Not Start (req Sw/push Sw) (one Key)
Door does not lock/unlock with request switch, and engine does not start when push-button ignition switch is pressed while carrying Intelligent Key. (One Intelligent Key has the symptom, other keys operate normally.)
Door lock operation (remote keyless entry) Door lock operation (request switch of ...