Removal and Installation
PrecautionsRemoval and Installation
CAUTION:
REMOVAL
Remove side turn signal lamp. Refer to Removal and Installation.
Remove puddle lamp harness connector from door mirror housing assembly .
: Vehicle front
Disconnect puddle lamp harness connector.
Remove puddle lamp fixing screw, and then remove puddle lamp assembly.
Disengage ...
Diagnosis Procedure
CHECK DOOR MIRROR MECHANISM
Check the following items.
Damage, deformation and foreign matter pinching of the door mirror mechanism.
Damage of harness due to rubbing and pinching.
Interference with other components.
Installed incorrectly.
Is the inspection result normal?
YES>>
GO TO 2.
NO> ...
PRECAUTIONS FOR REMOVING BATTERY TERMINAL : Precautions
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...