Nissan Armada 2025-2026 Service and Repair Manual: Diagnosis Procedure
CHECK DOOR MIRROR MECHANISM
Check the following items.
Damage, deformation and foreign matter pinching of the door mirror mechanism.
Damage of harness due to rubbing and pinching.
Interference with other components.
Installed incorrectly.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace the malfunctioning parts.
CHECK POWER WINDOW MAIN SWITCH POWER SUPPLY AND GROUND CIRCUIT
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair or replace the malfunctioning parts.
CHECK FOLDING MOTOR CIRCUIT
Check folding motor circuit.
Door mirror (driver side): Refer to Component Function Check.
Door mirror (passenger side): Refer to Component Function Check.
Is the inspection result normal?
YES>>Check intermittent incident. Refer to Intermittent Incident.
NO>>Repair or replace the malfunctioning parts.
Other materials:
Work Procedure
Perform camera calibration and perform writing to the around view monitor control unit, after removal/installation or replacement of each camera or camera mounting parts (front bumper molding center, door mirror, or others), or replacement of around view monitor control unit.
Parts name Operatio ...
Diagnosis Procedure
CHECK “AUTO DOOR UNLOCK” SETTING IN COMBINATION METER
Check “Auto Door Unlock” setting is “Ignition OFF”.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Set “IGN OFF” in combination meter.
REPLACE BCM
Replace BCM. Refer to Removal and Installation.
Confirm the ope ...
Work Procedure
REPLACE DRIVER SEAT CONTROL UNIT
Replace driver seat control unit. Refer to Removal and Installation.
>>
GO TO 2.
Vehicle SPECIFICATION RECOGNITION
Connect battery negative terminal. Power switch ON and wait for 30 seconds or more.
NOTE:
When the driver seat control unit receives a signal f ...
0.0047