Work Procedure
Moonroof and Sunshade Does Not Operate ProperlyRemoval and Installation
REMOVAL
Remove luggage side lower finisher LH. Refer to Removal and Installation.
Disconnect inverter unit harness connector.
Remove inverter unit mounting nuts.
Remove the bracket from the inverter unit if necessary.
INSTALLATION
Note the following, and install in the reverse order of removal.
To ...
Removal and Installation
REMOVAL
Front
Remove headlining. Refer to Removal and Installation.
Remove instrument panel assembly. Refer to Removal and Installation.
Remove front drain hose from fixing clips.
Disconnect front drain hose from moonroof unit assembly and front drain connector.
Rear
Remove headlining. Refer to Remo ...
Work Procedure
PERFORM ECM RECOMMUNICATING FUNCTION
Install ECM.
Contact backside of the registered Intelligent Key* to push-button ignition switch while push switch is pressed, then turn ignition switch ON.
*: To perform this step, use the key that is used before performing ECM replacement.
Maintain ignition swit ...