Diagnosis Procedure
CHECK SLIDING MECHANISM
Check for the following.
-
Mechanism deformation or pinched foreign materials.
-
Interference with other parts because of poor installation.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace the malfunctioning parts.
CHECK SLIDING SWITCH
Check sliding switch LH. Refer to Component Function Check.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair or replace the malfunctioning parts.
CHECK SLIDING MOTOR
Check sliding motor LH. Refer to Component Function Check.
Is the inspection result normal?
YES>>Check intermittent incident. Refer to Intermittent Incident.
NO>>Repair or replace the malfunctioning parts.
Other materials
Brake Pedal Vibration or Operation Sound Occurs
Description
Brake pedal vibrates and motor sound from ABS actuator and electric unit (control unit) occurs, when the engine starts.
Brake pedal vibrates during braking.
CAUTION:
Vibration may be felt during brake pedal is lightly depressed (just placing a foot on it) in the following conditions ...
Luggage Rear Plate
Removal and Installation
CAUTION:
Never damage the body panel.REMOVALCAUTION:
When removing, always use a remover tool that is made of plastic to prevent damage to the parts.Remove luggage floor box. Refer to Removal and Installation.
Release luggage rear plate portion of back door weather-strip. Re ...
Intelligent Key Battery
Removal and Installation
Release the lock knob at the back of the Intelligent Key and remove the mechanical key.
Insert remover tool (A) wrapped with a cloth into the slit 1 of the corner and twist 2 it to separate the upper part from the lower part.
CAUTION:
Never touch the circuit board or ...