Diagnosis Procedure
CHECK STEERING COLUMN CONTROL MODULE POWER SUPPLY AND GROUND CIRCUIT
Check steering column control module power supply and ground circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace the malfunctioning parts.
CHECK TILT & TELESCOPIC SWITCH GROUND CIRCUIT
Check tilt & telescopic switch ground circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair or replace the malfunctioning parts.
REPLACE STEERING COLUMN CONTROL MODULE
-
Replace steering column control module. Refer to Removal and Installation.
-
Confirm the operation again.
Does it operate normally?
YES>>INSPECTION END
NO>>Check intermittent incident. Refer to Intermittent Incident.
Other materials
Torque Converter Clutch Point Learning
Descripton
WARNING:
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System.
TCM memorizes a torq ...
Adjustment of Steering Angle Sensor Neutral Position
Description
Always adjust the neutral position of steering angle sensor before driving when the following operation is performed. Refer to Work Procedure.×: Required —: Not required Procedure Adjust the neutral position of steering angle sensor
Removing/ installing ABS actuator and electric un ...
Front Door Assembly
Removal and Installation
CAUTION:
Perform work with 2 workers, because it is heavy weight.
Support door with a proper material and use protective tape or shop cloth to protect door and body from falling and damage when removing and installing door assembly.
REMOVALRemove front door check link m ...