Work FlowRemoval and Installation
REMOVAL
Remove cover. Refer to Removal and Installation.
Disconnect light & rain sensor harness connector.
Disengage light & rain sensor fixing pawls, and then peel off light & rain sensor.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
...
Comparision of Chemical and Physical Properties between Aluminum and Iron
Property Aluminum alloy Iron Effect of welding Melting temperature °C (°F) 560 - 640
(1,040 - 1,184) 600 × 2.5
(1,112 × 2.5) Aluminum alloy melts before it turns red.
This makes it difficult to judge the temperature.
Heat conduction efficiency
cal/cm/sec/°C (BTU in/m2/h/°F) 0.28
(812.69) ...
Work Procedure
PERFORM SYSTEM INITIALIZATION
Close moonroof and sunshade.
Press and hold the moonroof switch CLOSE for approximately 10 seconds.
Moonroof and sunshade will move as following.
Moonroof tilt up, and the sunshade slightly close and stops.
Release the moonroof switch, and continue to press the moonroof ...