Diagnosis Procedure
CHECK RECLINING MECHANISM
Check for the following.
-
Mechanism deformation or pinched foreign materials.
-
Interference with other parts because of poor installation.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace the malfunctioning parts.
CHECK RECLINING SWITCH
Check reclining switch LH. Refer to Component Function Check.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair or replace the malfunctioning parts.
CHECK RECLINING MOTOR
Check reclining motor LH. Refer to Component Function Check.
Is the inspection result normal?
YES>>Check intermittent incident. Refer to Intermittent Incident.
NO>>Repair or replace the malfunctioning parts.
Other materials
Engine Oil Data Reset
Description
The oil control system allows calculating the remaining distance to drive before oil change request. The engine oil data reset must be performed after engine oil is changed. (For details, refer to Work Procedure .)CAUTION:
Never reset data except when changing engine oil.NOTE:
Data canno ...
Front Drive Shaft
Exploded View
Removal and Installation
WARNING:
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension Sys ...
Diagnosis and Repair Workflow
Work Flow
DETAILED FLOWINTERVIEW FROM THE CUSTOMER
Clarify customer complaints before inspection. First of all, perform an interview utilizing reproduce symptoms as well as fully understand it. Ask customer about his/her complaints carefully. Check symptoms by driving vehicle with customer, if neces ...