Disconnect battery negative terminal in advance.
Disconnect air bag system line in advance.
Never tamper with or force air bag lid open, as this may adversely affect air bag performance.
Be careful not to scratch pad and other parts.
When removing parts, use remover tool that is made of plastic.
Keep removed parts protected with a shop cloth.
If a clip is deformed or damaged, replace it.
If an unreusable part is removed, replace it with a new one.
Tighten bolts and nuts firmly to the specified torque.
After reassembly is complete, check that each part functions correctly.
Remove stains via the following procedure.
Water-soluble stains:
Oil stain:
Never use any organic solvent, such as thinner or benzine.
Precautions for Removing Battery TerminalAdjustment
WIPER BLADE POSITION ADJUSTMENT
Adjust clearance between the end of cowl top cover/front fender cover RH and the top of front wiper blade center.
Windshield glass Front wiper blade RH Front wiper blade LH Front fender cover RHCowl top cover
Standard clearance C : 20.8 ± 7.5 mm (0.82 ± 0 ...
Removal and Installation
REMOVAL
Fully open hood assembly.
Disengage fender cover fixing pawls.
LH side
: Pawl : Vehicle front
RH side
: Pawl : Vehicle front
Disengage fender cover fixing pawl, and then remove fender cover.
LH side
: Pawl : Vehicle front
RH side
: Pawl : Vehicle front
CAUTION:
After ...
Exploded View
Clip A Air breather hose A Hose connector Clip B Air breather hose B Clip C Bracket Hose clamp Front final drive assembly : Always replace after every disassembly. : Nï½¥m (kg-m, in-lb) ...