Inspection
Wheel BearingRemoval and Installation
REMOVAL
CAUTION:
Never damage the back door panel.
Remove back door trim. Refer to Removal and Installation.
Disconnect harness connectors.
Remove mounting nuts .
Apply protective tapes (A) on the parts to protect it from damage.
Disengage fixing clips using remover tool (A).
: Clip
Disconn ...
Removal and Installation
CAUTION:
Perform work with 2 workers, because it is heavy weight.
Support hood with a proper material and use protective tape or shop cloth to protect hood and body from falling and damage when removing and installing hood assembly.
REMOVAL
Support hood assembly with a proper material to prevent it ...
Removal & Installation
WARNING:
REMOVAL
Remove engine cover. Refer to Removal and Installation.
Remove front under cover using a power tool (commercial service tool). Refer to Removal and Installation.
Remove air inlet tube 1 and air inlet tube 2 of charge air cooler side as follows.Remove mounting bolt of air inlet tube ...