Nissan Armada 2025-2026 Service and Repair Manual: Sheet Metal Work Tools
This section explains various tools used in body repair work.
Sheet Metal Work
...
Hammers
A hammer is used to correct dents, projections or other deformations. Various shapes have been designed according to their purposes.
(1) TYPES AND FEATURES OF HAMMERS
(2) SELECTION AND MAINTENANCE OF ...
Other materials:
Removal and Installation
WARNING:
REMOVAL
CAUTION:
Rear Washer Tube A
Remove fender protector RH. Refer to Removal and Installation.
Disconnect rear washer tube A from connector and remove rear washer tube A from fixing clip .
Remove rear washer tube fixing clips .
Remove dash side finisher RH. Refer to Removal and In ...
Diagnosis Procedure
PERFORM SELF-DIAGNOSIS
With CONSULT
Ignition switch ON.
Select “Self Diagnostic Result” mode of “HVAC” using CONSULT.
Check DTC.
Is DTC detected?
B24F4-12 is detected.>>
Refer to DTC Description.
B24F4-14 is detected.>>
Refer to Diagnosis Procedure.
NO>>
GO TO 2.
CHECK ...
Configuration
Vehicle specification needs to be written with CONSULT because it is not written after replacing the ABS actuator and electric unit (control unit).
The configuration requires network connection. CONSULT connects to network and then it downloads the configuration data from the server. Then CONSULT wr ...
0.0051