Exploded View
For exploded view of side turn signal lamp, refer to Exploded View.
Removal and Installation
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation for preventing electric leakage. Refer to Precautions for Removing Battery Terminal.
REMOVAL
Remove door mirror finisher. Refer to Disassembly and Assembly.
Remove side camera (if equipped). Refer to Removal and Installation.
Disconnect side turn signal lamp harness connector 
.
Remove side turn signal lamp fixing pawls , and then remove side turn signal lamp.
INSTALLATION
Install in the reverse order of removal.
Replacement
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation for preventing electric leakage. Refer to Precautions for Removing Battery Terminal.
SIDE TURN SIGNAL LAMP
CAUTION:
Replacement of a single part is not possible due to the adoption of LED. For replacement, replace side turn signal lamp as a set. Refer to Removal and Installation.
Other materials
Rear A/c Control
Exploded View
Refer to Exploded View.
Removal and Installation
REMOVALRemove front center console rear finisher assembly. Refer to Removal and Installation.
Remove fixing screws , and then remove rear A/C control assembly.
Remove fixing screws , and then remove rear A/C control from rear A/C contr ...
Lumbar Support Unit
Removal and Installation
REMOVALRemove front seatback blower motor. Refer to Removal and Installation.
Disengage fixing portions and then remove front seat lumbar support unit.
Disconnect front seat pneumatic control unit connector (4 way lumbar support) or front seat lumbar support air pump conn ...
Sunshade Does Not Operate Properly
Description
Sunshade does not operate normally.
Sunshade OPEN/CLOSE does not operate.
Sunshade OPEN/CLOSE operation is slow.
Judder occurs during OPEN/CLOSE operation of sunshade.
Diagnosis Procedure
CHECK SUNSHADE
Check sunshade for damage, deformation, of interference with other parts.
Is ...