Exploded View
CITY MODEL

![]() |
Front bumper fascia | ![]() |
U nut | ![]() |
Front fog lamp bracket |
![]() |
Front fog lamp | ||||
| : vehicle front | |||||
![]() |
: N·m (kg-m, in-lb) | ||||
OFF ROAD MODEL

![]() |
Front bumper fascia | ![]() |
Front fog lamp | ||
| : vehicle front | |||||
![]() |
: N·m (kg-m, in-lb) | ||||
Removal and Installation
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation for preventing electric leakage. Refer to Precautions for Removing Battery Terminal.
REMOVAL
Remove front bumper fascia. Refer to following.
-
City model: Removal and Installation.
-
Off road model: Removal and Installation.
Disconnect front fog lamp harness connector.
Remove front fog lamp mounting bolts, and then remove front fog lamp.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
After installation, perform aiming adjustment. Refer to Adjustment.
Replacement
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation for preventing electric leakage. Refer to Precautions for Removing Battery Terminal.
FRONT FOG LAMP
CAUTION:
Replacement of a single part is not possible due to the adoption of LED. For replacement, replace front fog lamp as a set. Refer to Removal and Installation.
Other materials
How to enable/disable the BSW system
Vehicle information display
Steering-wheel-mounted controls (right side)
To configure the Nissan Armada BSW system, follow these steps:
1. Press the
button until "Settings" appears in the vehicle information display, then confirm
using the scroll dial. Navigate to " ...
Basic information
WARNING
Never attempt to lift two wheels of the Nissan Armada off the ground
while the engine is running and shift the transmission into any drive or reverse
position. This improper procedure may cause severe drivetrain damage or unexpected
vehicle movement, potentially leading to serio ...
Diagnosis and Repair Work Flow
Work Flow
OVERALL SEQUENCEDETAILED FLOWINTERVIEW FROM THE CUSTOMER
Clarify customer complaints before inspection. To do so, reproduce the symptom before hand and fully understand it. Then interview the customer thoroughly. Check the symptoms by driving vehicle with the customer, if necessary.
CAUTIO ...




