Tool number (TechMate No.) Tool name | Description | |
|---|---|---|
KV40104001 (NI-53385) Hub lock nut wrench a: 85 mm (3.35 in) b: 65 mm (2.56 in) |
| Removing and Installing wheel hub lock nut. |
KV40107300 (NI-51751) Boot band crimping tool |
| Installing boot band |
KV40107310 (-) Boot band crimping tool |
| Installing boot band |
KV40107500 (-) Drive shaft attachment |
| Removing drive shaft |
KV38107900 (NI-33904) (NI-52469-1) Protector a: 32 mm (1.26 in) dia. b: 25 mm (0.98 in) |
| Installing drive shaft |
KV40108700 (-) Lock nut crimp punch a: 5 mm (0.20 in) b: 7 mm (0.28 in) |
| Installing wheel hub lock nut |
KV40108800 (NI-52982) Lock nut chisel a: 44.5 mm (1.752 in) b: 10 mm (0.39 in) dia. c: 31 mm (1.22 in) d: 4.5 mm (0.177 in) e: 26 mm (1.02 in) f: 0.4 mm (0.016 in) g: 4 mm (0.16 in) h: 24 mm (0.94 in) |
| Removing wheel hub lock nut |
Preparation
Commercial Service ToolDisassembly and Assembly
CAUTION:
DISASSEMBLY
Remove armrest (LH seat).Disengage fixing pawls using a remover tool (A), and then remove armrest hinge cover RH.
: Pawl
Remove armrest mounting bolt and armrest hinge mounting nuts .
Remove armrest hinge and armrest hinge bracket RH as a set from center seatback frame. ...
Removal and Installation
WARNING:
REMOVAL
Remove air breather hose A from transfer assembly.
Remove clip A .
Remove clip B .
Remove A/T air breather hose. Refer to Removal and Installation.
Release clip C and remove air breather hose assembly from bracket.
Separate each component part.
INSTALLATION
Note the follo ...
Safety information
WARNING
Always stop the Nissan Armada in a safe place and engage the parking
brake before operating the system. Using the system while driving can distract
the driver and increase the risk of accidents.
Maintain full attention on driving at all times. If the Nissan Armada
system respo ...