Diagnosis Procedure
CHECK 12V BATTERY
Check 12V battery. Refer to Work Flow.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace the malfunctioning parts.
CHECK AIR BAG FUSE
Check 10 A fuse [No. 5, located in fuse block (J/B)].
Is the inspection result normal?
YES>>GO TO 3.
NO>>Replace the fuse.
PERFORM ZERO POINT RESET
-
Perform zero point reset. Refer to Description.
-
Check SRS air bag warning lamp operation.
Is the inspection result normal?
YES>>INSPECTION END
NO>>GO TO 4.
CHECK DTC WITH AIR BAG DIAGNOSIS SENSOR UNIT
Check that DTC is not detected with air bag diagnosis sensor unit.
Is the inspection result normal?
YES>>GO TO 5.
NO>>Refer to DTC Index.
CHECK COMBINATION METER
Check combination meter. Refer to Work flow.
Is the inspection result normal?
YES>>GO TO 6.
NO>>Repair or replace the malfunctioning parts.
REPLACE AIR BAG DIAGNOSIS SENSOR UNIT
-
Replace air bag diagnosis sensor unit. Refer to Removal & Installation.
-
Check SRS air bag warning lamp operation.
Is the inspection result normal?
YES>>INSPECTION END
NO>>Check intermittent incident. Refer to Intermittent Incident.
Other materials
Vtc
Exploded View
Valve timing control cover (bank 1)
Seal ring
Electric intake valve timing control actuator (bank 1)
Valve timing oil control solenoid valve (bank 1)
O-ring
Valve timing oil control solenoid valve (bank 2)
Valve timing control cover (bank 2)
Electric intake val ...
Approach Unlock/walk Away Lock Function Does Not Operate (one Key)
Description
Approach unlock/walk away lock function does not operate. (One Intelligent Key has the symptom, other keys operate normally.)NOTE:
Before starting diagnosis check that vehicle condition is as shown in “Conditions of vehicle”, and check each symptom.SYMPTOM TABLE (BOTH INTELLIGENT KEY ...
Distance Sensor Alignment
Work Procedure
Always perform the radar alignment after removing and installing or replacing the distance sensor. Application Notice Type Description
TYPE 1
When using KV99112700 for radar alignment. Refer to Description.
TYPE 2
When using 1-20-2851-1 for radar alignment. Refer to Descript ...