Removal & Installation
REMOVAL
Remove instrument pad A. Refer to Removal and Installation.
Remove mounting screws 
, and remove switch panel 
from instrument pad A 
.
Unhook the pawls to remove the switch from the switch panel .
INSTALLATION
Installation is in the reverse order of removal.
Other materials
Road Wheels & Tires
Inspection
WARNING:
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System.
APPEARANCERoad Wheel ...
Auto Door Lock Operation Does Not Operate. Automatic Back Door Control Unit
Automatic Back Door Control Unit
Diagnosis Procedure
REPLACE INTELLIGENT KEY UNIT
Replace Intelligent Key unit. Refer to Removal and Installation.
Confirm the operation after replacement.
Is the result normal?
YES>>
INSPECTION END
NO>>
Check intermittent incident. Refer to Inter ...
Hood Seal
Removal and Installation
REMOVALApply protective tape (A) on the part to protect it from damage.
Disengage hood seal fixing clips using a remover tool (A), and then remove hood seal .
INSTALLATIONInstall in the reverse order of removal. ...