Removal & Installation
REMOVAL
Remove instrument pad A.Refer to Removal and Installation.
Remove mounting screws 
, and remove switch panel 
from instrument pad A 
.
Unhook the pawls to remove the switch from the switch panel .
INSTALLATION
Installation is in the reverse order of removal.
Other materials
Service Notice and Precautions for Tpms
SERVICE NOTICE AND PRECAUTIONS FOR TPMS : Precautions
Low tire pressure warning lamp turns ON when tire pressure is less than warning tire pressure value. Adjust tire pressure for all wheels to the specified value. Refer to TIRE AIR PRESSURE : Service Data.
Low tire pressure warning lamp blinks ...
Spare Tire and Wheel Assembly
Exploded View
Handle rod guide
Spare wheel carrier assembly
Spare tire and wheel assembly
: vehicle front
: N·m (kg-m, ft-lb)
Removal & Installation
WARNING:
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to t ...
Calibration of Automatic Back Door Position Information
Description
When the following work is performed, it is necessary to perform initial setting of automatic back door position information to operate automatic back door system. Refer to Work Procedure.
After removing and installing, or replacing back door assembly
After removing and installing, or ...