Diagnosis ProcedureAdjustment Fitting of Front Fender
Fitting adjustment means adjustment of clearance or gradient of the hood, door, front fender, etc. with respect to its adjacent part, and adjustment of gradient at the press line.
Adjustment of front fender is described as an example.
Adjust the fitting at the front fender mounting position. Tighten ...
Removal and Installation
REMOVAL
Fully open hood assembly.
Disengage fender cover fixing pawls.
LH side
: Pawl : Vehicle front
RH side
: Pawl : Vehicle front
Disengage fender cover fixing pawl, and then remove fender cover.
LH side
: Pawl : Vehicle front
RH side
: Pawl : Vehicle front
CAUTION:
After ...
Removal and Installation
REMOVAL
CAUTION:
Drain engine coolant from cooling system. Refer to ENGINE COOLANT : Draining.
Disconnect rear cooler pipe assembly from rear A/C unit assembly. Refer to Removal and Installation.
Remove luggage side lower finisher RH. Refer to Removal and Installation.
Remove each duct.
Rear inlet ...