Nissan Armada 2025-2026 Service and Repair Manual: Steering Shaft
| Item | Standard |
|---|---|
| Sliding range* | 50 mm (1.97 in) or more |
| Lower joint length* (extended position) | 490 mm (19.29 in) or less |
| Steering shaft runout* | 0.2 mm (0.008 in) or less |
*: For measuring position, Refer to Inspection.
Steering Column
Item Standard Steering column length*
(maximum telescopic) 600.3 - 604.3 mm (23.63 - 23.79 in) Tilt operating range* 44 mm (1.73 in) Telescopic operating range* 60 mm (2.36 in) Rotating torque ...
Steering Gear and Linkage
Item Standard
: Gear housing end
: Inner socket end Rack stroke neutral position (C) 27.5 mm (1.083 in) Rack stroke full stroke position (C) 154 mm (6.06 in) Outer socket ball joint Swing for ...
Other materials:
Work Flow
OVERALL SEQUENCE
DETAILED FLOW
INTERVIEW FOR MALFUNCTION
NOTE:
>>
GO TO 2.
SELF-DIAGNOSIS WITH CONSULT
Perform “All DTC Reading” with CONSULT.
Is any DTC detected?
YES>>
Record or print self-diagnosis results and freeze frame data (FFD). GO TO 5.
NO>>
GO TO 3.
ACTION TES ...
FRONT BRAKE CALIPER ASSEMBLY : Inspection
INSPECTION AFTER DISASSEMBLY
Check the following items and replace if necessary.
Cylinder Body
Check cylinder inner wall for rust, wear, cracks or damage.
CAUTION:
Always clean with new brake fluid. Never clean with mineral oil such as gasoline and diesel fuel.
Torque Member
Check the torque member ...
Removal and Installation
WARNING:
REMOVAL
Remove transfer assembly from vehicle. Refer to Removal and Installation.
Remove input oil seal.
CAUTION:
Never damage the front case and input shaft.
INSTALLATION
Note the following, and install in the reverse order of removal.
L : 1.5 – 2.5 mm (0.059 – 0.098 in)
CAUTION: ...
0.0052