Steering WheelWork Procedure
Perform action test to verify the customer's concern.
Perform action test and check the system operation after system diagnosis.
NOTE:
Perform the Intelligent Blind Spot Intervention system action test after checking that the I-LI system operates normally because the Intelligent Blind Spot Interven ...
Removal and Installation
REMOVAL
Remove emblem from the panel while warming using an industrial dryer.
CAUTION:
Never damage the painted surface of the panel when removing.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
Never reuse the emblem which was peeled.
Degrease the ...
Diagnosis Procedure
CHECK SLIDING MECHANISM
Check for the following.
Mechanism deformation or pinched foreign materials.
Interference with other parts because of poor installation.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioning parts.
CHECK SLIDING SWITCH
Check ...