| Symptom | Possible cause | Inspection item/Work item |
|---|---|---|
” ”is displayed |
| Perform diagnosis procedure |
” ” is displayed | Wi-Fi abnormality | Perform diagnosis procedure |
” ” is displayed | G sensor abnormality | Perform diagnosis procedure |
” ” is displayed | microSD card not inserted | Insert a microSD card (accessory: 8GB) that is guaranteed to work properly. |
” ” is displayed | microSD card error | Format the microSD card. If the formatting process does not complete successfully, replace it with a new microSD card which is "8GB" or above. |
| Recognizing microSD card | microSD capacity is insufficient.
|
|
| Blurred image |
| Refer to Diagnosis Procedure. |
Blurred ImagePrecautions for Body Repair
WARNING:
WARNING:
The repair information in this section is intended for trained body repair technicians who have attained a high level of skill and experience (e.g. ASE Collision Repair Certification, I-CAR Professional Development Program [PDP] training, etc.) in repairing collision damaged vehicl ...
Removal and Installation
CAUTION:
Never damage the roof panel.
REMOVAL
CAUTION:
Fully open back door.
Release roof rear garnish portion of back door weather-strip. Refer to Removal and Installation.
Release connector tongue of third seat belt retractor from roof rear garnish.
Remove luggage room lamp. Refer to Removal and I ...
Work Procedure
START
With CONSULT
Start engine and warm it up to normal operating temperature.
On CONSULT screen, select “ECM”>>“Work support”>>“Air fuel ratio learning value clear”.
Clear mixture ratio self-learning value by touching “CLEAR”.
With GST
Start engine and warm it up to no ...