NIARMADA Nissan Armada manuals & owner information
Nissan Armada owner resource

Manuals, service information and practical owner guidance.

Fast access to Nissan Armada owner manuals, service procedures, maintenance references, technical information and practical guides for different Armada generations.

Browse manuals →
Nissan Armada manual library

Nissan Armada 2025-2026 Service and Repair Manual: System Setting

Nissan Armada 2025-2026 Service and Repair Manual / Body Interior / Automatic Drive Positioner / System Setting

Description

The settings of the automatic driving positioner system can be changed, using information display in the combination meter and the set switch. Always check the settings before and after replacing driver seat control unit. For details, refer to Work Procedure.

×: Applicable

Setting Change
Item Content Information display Set switch Factory setting
Exit assist (seat)

Exit assist (seat) can be selected:

ON (operated) – OFF (not operated) 		x x ON
Exit assist (steering column)

Exit assist (steering column) can be selected:

ON (operated) – OFF (not operated)

Work Procedure

CHOOSE METHOD

There are two ways of setting method.

Which method do you choose?

With information display>>

GO TO 2.

With set switch>>

GO TO 3.

WITH INFORMATION DISPLAY

  1. Ignition switch ON.

  2. Select "Driving Position" of “vehicle Settings” of "Settings" of information display.

  3. Select "Exit Seat Slide" or "Exit Steering" to change between ON and OFF.

>>

GO TO 4.

WITH SET SWITCH

  1. Ignition switch OFF.

  2. Push setting button and hold for more than 10 seconds.

>>

GO TO 4.

CONFIRM THE OPERATION

Check the exit assist function setting is changed.

>>

WORK END

    Other materials

    Drive Belt Auto Tensioner and Idler Pulley
    Exploded View Idler pulley Drive belt auto-tensioner   : N·m (kg-m, ft-lb) : vehicle front Removal and Installation WARNING: Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. ...

    Mac Key Writing
    Description When replacing sub-TCM, it is necessary to write MAC key to sub-TCM. Write MAC key to sub-TCM according to "MAC Key writing" procedure of "CONSULT Operation Manual". Refer to Work Procedure.CAUTION: During MAC key writing, maintain the following conditions: Ignition switch ON CONSULT ...

    Telematics Antenna
    Removal & Installation REMOVALRemove the instrument panel assembly. Refer to Removal and Installation. Remove the screw and clips to remove the telematics antenna . : Clips INSTALLATIONInstall in the reverse order of removal. Feeder Layout Telematics antenna TCU : Crip ...