NIARMADA Nissan Armada manuals & owner information
Nissan Armada owner resource

Manuals, service information and practical owner guidance.

Fast access to Nissan Armada manuals, operating instructions, maintenance references and technical information.

Browse manuals →
Nissan Armada manual library

Nissan Armada 2025-2026 Service and Repair Manual: Third Seat Rh Position Initialization

Nissan Armada 2025-2026 Service and Repair Manual / Body Interior / Seat / Third Seat Rh Position Initialization

Description

Perform the third seat RH position initialization when the following conditions are performed. For details, refer to Work Procedure.

  • Replacing third seat control unit RH.
  • Replacing third seat RH.
  • Manual function and folding function of third seat RH does not operate normally.

Work Procedure

CHOOSE METHOD

There are two ways of initialization method.

Which method do you choose?

With CONSULT>>

GO TO 2.

Without CONSULT>>

GO TO 3.

WITH CONSULT

With CONSULT

  1. Ignition switch ON.
  2. Perform "Third seat RH position initialization" in "Work support" mode of "THIRD SEAT RH" using CONSULT.
  3. After initialization is complete, the buzzer sounds twice.

>>

GO TO 4.

WITHOUT CONSULT

Without CONSULT

  1. Stop the vehicle and start the engine.
  2. Press the reclining switch RH (forward).
  3. Press the reclining switch RH (backward) within 1 second.
  4. Press the reclining switch RH (forward) within 1 second.
  5. Press the reclining switch RH (backward) within 1 second.
  6. After repeating steps 4 and 5 three times, release the reclining switch RH.
  7. After initialization is complete, the buzzer sounds twice.

>>

GO TO 4.

CHECK THE FUNCTION

Check that manual function and folding function operates normally.

>>

WORK END

    Other materials

    Three-point type seat belt
    Basic information The three-point seat belt system in the Nissan Armada is a critical safety feature designed to provide maximum protection for both the driver and passengers. By properly distributing forces across the shoulder and hips, this system significantly reduces the risk of injury du ...

    Does Not Operate
    Diagnosis Procedure Automatic brake hold function does not operate when the operating conditions are satisfied.PERFORM SELF-DIAGNOSIS (CHASSIS CONTROL MODULE) With CONSULT Perform self-diagnosis for “CHASSIS CONTROL”. Is DTC detected? YES>> Check the DTC. Refer to DTC Index. NO>> G ...

    Diagnosis and Repair Work Flow
    Work Flow OVERALL SEQUENCEDETAILED FLOWINTERVIEW FOR MALFUNCTION It is also important to clarify the customer concerns before starting the inspection. Interview the customer about the concerns carefully and understand the symptoms fully. NOTE: The customers are not professionals. Never assume that ...