Exploded View
 |
Transfer assembly |  |
Transfer range position sensor | ||
 |
: N·m (kg-m, in-lb) |
Removal and Installation
WARNING:
-
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System.
REMOVAL
Ignition switch OFF.
CAUTION:
Wait for 60 seconds after the ignition switch OFF.
Disconnect negative battery terminal. Refer to Removal and Installation.
Disconnect the transfer range position sensor connector.
Remove the transfer range position sensor.
INSTALLATION
Note the following, and install in the reverse order of removal.
CAUTION:
-
Never damage the O-ring of position sensor.
-
Never contaminate or damage the O-ring mounting surface.
Inspection
INSPECTION AFTER INSTALLATION
Check fluid leakage and the fluid level. Refer to Inspection.
ADJUSTMENT AFTER INSTALLATION
When replacing transfer range position sensor, performe writing unit parameter. Refer to Description.
Other materials
Seat Belt Warning Lamp Does Not Turn Off
Diagnosis Procedure
CHECK DTC OF AIR BAG DIAGNOSIS SENSOR UNIT
Check DTC in “Self Diagnosis Result” mode of “AIR BAG” using CONSULT.
Is DTC detected?
YES>>
Perform trouble diagnosis related to the detected DTC. Refer to DTC Index.
NO>>
GO TO 2.
CHECK DTC OF BCM
Check DTC in “ ...
Door Lock Operation Warning Does Not Operate
Diagnosis Procedure
CHECK DOOR LOCK FUNCTION
Check door lock using door request switch.
Does door lock with door request switch?
YES>>
GO TO 2.
NO>>
Refer to DTC Diagnosis Procedure.
CHECK INTELLIGENT KEY WARNING BUZZER
Check Intelligent Key warning buzzer.
Refer to Diagnosis Procedure ...
Preset Switch
Exploded View
Front center console switch finisher assembly
Preset switch
: N·m (kg-m, in-lb)
Removal & Installation
REMOVALRemove the front center console switch finisher assembly. Refer to Removal and Installation.
Remove the preset switch mounting screw , and remove ...