Without Propilot Assist 2.1
Exploded View
 |
ADAS control unit 2 |  |
Bracket | ||
 |
: N·m（kg-m、in-lb） | ||||
Removal and Installation
REMOVAL
Remove combination meter. Refer to Removal and Installation.
Remove mounting screw 
, and remove bracket .
Remove mounting nuts , and remove ADAS control unit 2 from steering member .
Disconnect ADAS control unit 2 connector.
Remove mounting nuts , and remove ADAS control unit 2 from bracket .
INSTALLATION
Note the following, and install in the reverse order of removal.
CAUTION:
Be sure to perform “ADDITIONAL SERVICE WHEN REPLACING ADAS CONTROL UNIT 2” when replacing ADAS control unit 2. Refer to Work Procedure.
With Propilot Assist 2.1
Exploded View
|
ADAS control unit 2 | |
ADAS control unit 2 bracket | ||
|
: N·m（kg-m、in-lb） | ||||
Removal and Installation
REMOVAL
Remove combination meter. Refer to Removal and Installation.
Remove mounting screw , and remove bracket .
Remove mounting nuts , and remove ADAS control unit 2 from steering member .
Disconnect ADAS control unit 2 connector.
Remove mounting nuts , and remove ADAS control unit 2 from brackets .
INSTALLATION
Note the following, and install in the reverse order of removal.
CAUTION:
Be sure to perform “ADDITIONAL SERVICE WHEN REPLACING ADAS CONTROL UNIT 2” when replacing ADAS control unit 2. Refer to Work Procedure.
Other materials
Additional Service When Replacing Transmission Assembly
Description
WARNING:
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System.
When replacing the ...
Back Door Auto Closure Control Unit
Removal and Installation
REMOVALRemove luggage side lower finisher LH. Refer to Removal and Installation.
Disconnect back door auto closure control unit harness connector.
Remove back door auto closure control unit mounting nuts , and then remove back door auto closure control unit .
INSTALLATIONIn ...
Side Turn Signal Lamp
Exploded View
For exploded view of side turn signal lamp, refer to Exploded View.
Removal and Installation
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation for preventing electric leakage. Refer to Precautions for Removing Battery Terminal. ...