Diagnosis Procedure
A malfunction of brake pedal feel (height or others) is detected when the brake pedal is depressed.
CHECK AXLE
Check that there is no significant looseness of axle.
-
Front axle
-
2WD models: Refer to Inspection.
-
4WD models: Refer to Inspection.
-
-
Rear axle: Refer to Inspection.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace error-detected parts.
CHECK DISC ROTOR
Check the disc rotor runout.
-
Front: Refer to Inspection and Adjustment.
-
Rear: Refer to Inspection and Adjustment.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Grind or replace rotor.
CHECK BRAKE FLUID LEAKAGE
Check the brake fluid leakage.
-
Front: Refer to Inspection.
-
Rear: Refer to Inspection.
Is the inspection result normal?
YES>>GO TO 4.
NO>>Repair or replace error-detected parts.
CHECK BRAKE PEDAL
Check the brake pedal items. Refer to Inspection and Adjustment.
Is the inspection result normal?
YES>>GO TO 5.
NO>>Adjust the brake pedal items. Refer to Inspection and Adjustment.
CHECK BRAKING FORCE
Check the braking force.
Is the inspection result normal?
YES>>GO TO 6.
NO>>Check each component of brake system.
CHECK BRAKE PERFORMANCE
Disconnect ABS actuator and electric unit (control unit) connector so that ABS does not operate. Check that brake force is normal in this condition. Connect harness connectors after checking.
Is the inspection result normal?
YES>>Normal
NO>>Check each component of brake system.
Other materials
Exhaust System
Exhaust System
Commercial Service Tool
Tool name Description
Power tool
Loosening bolts and nuts
Exhaust System
Inspection
WARNING:
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component par ...
Front Heater Outlet Pipe Assembly
Removal and Installation
REMOVALDrain engine coolant from cooling system. Refer to ENGINE COOLANT : Draining.
Remove engine cover. Refer to Removal and Installation.
Remove air inlet tube 1. Refer to Removal & Installation.
Remove front heater outlet pipe assembly mounting nuts and mounting bol ...
Intelligent Rear View Mirror System Does Not Operate
Diagnosis Procedure
INTELLIGENT REAR VIEW MIRROR FUNCTIONAL INSPECTION
Ignition switch ON.
Check the intelligent rear view mirror system is operating normally after setting power supply lever of intelligent rear view mirror lower part to ON.
Is the inspection result normal?
YES>>
GO TO ...