Diagnosis Procedure
Diagnosis ProcedureRemoval and Installation
REMOVAL
2WD Models
Remove glove box assembly. Refer to Removal and Installation.
Remove passenger knee air bag module. Refer to Removal and Installation.
Disconnect A/C auto amp. harness connectors and .
: Vehicle front
Remove fixing screw , and then slide A/C auto amp. in the direction indica ...
Inspection
INSPECTION AFTER REMOVAL
Check the following items, and replace the part if necessary.
Ball Joint Inspection
Check boots of upper link, lower link and steering outer socket ball joint for breakage, axial play, and swing torque:
Upper link: Refer to Inspection.
Lower link: Refer to Inspection.
Steeri ...
Removal & Installation
WARNING:
REMOVAL
Disconnect battery cables from negative terminal. Refer to Exploded View.
Drain engine coolant. Refer to ENGINE COOLANT : Draining.
CAUTION:
Perform this step when the engine is cold.
Never spill engine coolant on drive belt.
Remove the following parts:
Drive belt. Refer to Remov ...