Exploded ViewRemoval and Installation
REMOVAL
Remove back door finisher. Refer to Removal and Installation.
Disconnect license plate lamp harness connectors.
Remove back door opener switch assembly fixing pawls using a remover tool (A), and then remove back door opener switch .
: Pawl
INSTALLATION
Install in the reverse order of re ...
Inspection
INSPECTION AFTER DISASSEMBLY
Drive Gear and Drive Pinion
Clean up the disassembled parts.
If the gear teeth never mesh or line-up correctly, determine the cause and adjust or replace as necessary.
If the gears are worn, cracked, damaged, pitted or chipped (by friction) noticeably, replace with new d ...
ECM : Removal & Installation
CAUTION:
Perform ADDITIONAL SERVICE WHEN REPLACING ECM. Refer to Work Procedure.
REMOVAL
With ProPILOT Assist 2.1
Disconnect the ECM harness connectors.
Remove ECM mounting nuts ( ) and remove ECM from the bracket.
Remove bracket mounting nuts ( ) and remove the bracket .
Without ProPILOT Ass ...