Click link to Wiring Diagram.
Inspection
NOTE:
If the hood lock control cable assembly is bent or deformed, replace it.
Check that secondary latch is securely engaged with bracket from dead load of hood assembly.
Check that primary latch is securely engaged with hood striker when hood assembly is closed [freefall from approximately 200 m ...
Removal and Installation
WARNING:
REMOVAL
The ignition switch OFF.
CAUTION:
Wait for 60 seconds after the ignition switch OFF.
Disconnect negative battery terminal. Refer to Removal and Installation
Disconnect the transfer control actuator connector .
Remove harness clip .
Remove transfer control actuator mounting bolt ...
Vehicle Speed at Which Gear Shifting Occurs
2WD
STANDARD MODE
Unit: km/h (MPH)
Gear position Throttle position Full throttle Half throttle D1 → D2 44 - 48 (27 - 30) 40 - 44 (25 - 27) D2 → D3 73 - 81 (45 - 50) 65 - 73 (40 - 45) D3 → D4 107 - 117 (66 - 73) 93 - 103 (58 - 64) D4 → D5 149 - 159 (93 - 99) 121 - 131 (75 - 81) ...