Precautions for Removing Battery Terminal
Inverter UnitInspection and Adjustment
FRONT WASHER NOZZLE SPRAY POSITION
Inspection
NOTE:
Refer to the figure below for front washer nozzle spray position.
Center Black printed frame line : Spray area
Unit: mm (in)
X
(from center) 493.7
(19.44) 387.7
(15.26) 146.1
(5.75) 43.6
(1.72) 46.5
(1.83) 177.0
(6.97) 417.7
(16.44) 570.8
(22. ...
Removal and Installation
REMOVAL
Remove front grille upper. Refer to the following.
Off road models: Removal and Installation
City models: Removal and Installation
Disconnect exhaust gas/outside odor detecting sensor harness connector .
Disengage fixing clip, and then remove exhaust gas/outside odor detecting sensor har ...
Work Procedure
CAUTION:
After removing/replacing the yaw rate/side/decal G sensor or replacing the ABS actuator and electric unit (control unit), the decel G sensor of the ABS actuator and electric unit (control unit) must be calibrated first. Refer to Description.
PREPARATION BEFORE CALIBRATION PROCEDURE
Park the ...