Special Service ToolsDiagnosis Procedure
COMBINATION SWITCH INSPECTION
Check combination switch. Refer to Symptom Table.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioning part.
CHECK POSITION LIGHT REQUEST SIGNAL
With CONSULT
Select “Position light request” in “Data Monitor” ...
Diagnosis Procedure
NOTE:
CHECK COOLING SYSTEM
Check engine coolant level and check for leakage. Refer to ENGINE COOLANT : Inspection.
Check reservoir tank cap. Refer to RESERVOIR TANK CAP : Inspection.
Check water flow sounds of the engine coolant. Refer to ENGINE COOLANT : Refilling.
Is the inspection result normal? ...
Work Procedure
CAUTION:
Make sure to use CONSULT when performing stroke sensor calibration. (It cannot be performed by any means other than CONSULT.)
VEHICLE CONDITION
Stop the vehicle.
Turn the ignition switch OFF and disconnect CONSULT from data link connector.
>>
GO TO 2.
CHECK 12V BATTERY
Check the 12 ...